MONOLITHIC SILO 27 CM

Steel Silo Specifications

The silo is constructed from electrowelded steel sheet, featuring perimeter reinforcements made from rolled and welded profiles attached to the body. The conical lower part is designed with an appropriate thickness and slope for use with dry sand, and includes a drip tray applied to the bottom, as well as removable vertical support columns with bracing.

The cylindrical section is composed of four rings, each with a diameter of 2,400 mm and a height of 1,500 mm, totaling 6,000 mm, which corresponds to a theoretical capacity of 27 cubic meters. When combined with the 2 cubic meters from the conical section, the overall theoretical capacity reaches 29 cubic meters.

Equipment Included:

• Butterfly Valve: DN 150 with manual control at the central discharge.
• Side Discharge Connection: Equipped with a butterfly valve DN 150 with manual control.
• Pressure Control Valve: Pre-set for anti-explosion and anti-implosion.
• Ground Loading Pipe: Flanged and complete with a removable anti-wear casing.
• Provision for Dust Suppression Filter Installation: Mounted at height.
• Threaded Connections for Level Sensors.
• Removable Upper Railings: Including toe boards, knee guards, and parapets.
• Ship's Ladder: With fall protection according to regulations.
• Dismantlable Template: For positioning the tie rods in the reinforced concrete foundation.
• Series of Tie Rods: 16 tie rods for each silo, complete with bolts to be embedded in the concrete pour.
• Manhole at the Top: For internal inspection.
• Height of Central Discharge from Ground: 1,600 mm.

Upon request, the original structural calculation report can be provided.